User manual, users manuals, user guide, operating instructions. SCANmic 8 Channel 2-Way Radios Instruction manual FX-3 TWIN PMR 446 English manual NOTE. 11 Channel Scan. Download Iflix To Blackberry- Download Preactivated Version. Brondi Fx-3 Twin Pmr 446 User Guide.

] Using any other adaptor will result in non-compliance with EN60065 and will invalidate any approvals & warranty. It takes about 10 hours to fully recharge the batteries if they are completely run down. Plug the mains adaptor into a 230V AC, 50Hz main socket with the switch on the socket set to OFF. Lift up the Mic/Ear/Charger cover, insert the round connector at the side of the unit. ] You can communicate with any FX-400 user set to the same channel who also turns off the sub-channel operation (or whose FX-400 unit does not have the feature). Each channel also has 83 digital codes to let you set up group of users for more secured private communication.

Note: Once you set the DCS code, CTCSS will automatically set to off mode or vise versa. Transmitting and Receiving The FX-400 transmission is 'one way-at-a-time. 3 Transmitting (sending a speech) The unit is continuously in the Receive mode when the unit is turned ON and not transmitting.

When a signal is received on the current channel, 'RX' will be displayed on the LCD Screen and the receiver LED lights up. Hold the unit in a vertical position with the MIC (Microphone) 5 cm away from the mouth. While holding the PTT button, speak into the MIC (microphone) in a normal tone of voice. 4 Monitor You can use the Monitor feature to check for weak signals on the current channel. Your FX-400 will pick up signals on the current channel, including background noise. 5 Setting the VOX (Voice Activated) Sensitivity In VOX mode, the FX-400 will transmit a signal only when it is activated by your voice or other sounds around you.