I am a new member and I service printers through my business: First let me say that I use forums and I am not one to shotgun questions just looking for an answer. If you can provide info for me, I will follow up with my results including pics, data etc. What i am asking is for info on the Mutoh Falcon RJ-4100.

Download Mutoh RJ-4100 Service Manual in pdf. Service Manual Mutoh Falcon Color RJ-4100 (RJ 4100/RJ4100) Contents: 1. Safety Instructions.

I have a customer with a small printing business who has one that displays a 'no cap position' error. I'd like to get a service manual etc, and If anyone knows of a source or you have one, let me know. Thanks -Mike. Mutoh Falcon / Rockhopper repair project I have posted before on this and I wanted to add some pics. The original problem was the 'no home position' message which was reset by going into service mode (power on while holding top 3 keys), going to adj: home and setting the home position when the head was moved over all the way to the right. Then the terrible 'undefined paper' message would not allow me to get any further. Here is the printer: The first step was to test the sensors.

I went into service mode and chose exam --->sensors ---->edge sensor. I saw the display with a low number between 10-20. Then I placed a paper under the head. The sensor changed to this: I then went to the exam category in the service mode of sensors---->Xr (for X plane Rear sensor) Here it is: This sensor read 'off' and turned on when I placed a paper on top of it.

The final sensor is Xf (for X plane front) I can not see where this sensor is located, but according to the service manual, there is a connector on the main logic board. I will have to open up the lower control box and take a look to see if that sensor is connected. I am going to update this as I progress, but if anyone has something they can add it would be great -Mike. Mcintosh Trail Head Start Program here. All posts and other information available at Signs 101 should be viewed as the opinion only of the poster. No claim is made that any information is accurate. As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster.

Such posts should, however, be reported to an Administrator for review. Neither the owners, employees, officers nor directors of Signs 101 shall be held responsible or liable under any legal theory for any loss or injury resulting from any post, information made available, policy, action or lack of an action at Signs 101. Your use of this website is your acceptance of these terms and conditions of use. A Eon Media,LLC Company Signs101 Links.

1.31 Hdd Regenerator here. Before installing this printer driver Mutoh RJ-6100, read the following precautions: • Before starting the installation of drivers, connect your printer Mutoh RJ-6100 to your computer, and that the printer is powered On. See your printer manual for details. Do not turn printer off, remove cables, or unplug the printer, or interrupt it in any way during the driver installation process.

Sky Sailing Midi Files. • Close virus protection programs or other software programs that are running on your computer. • You must have full-control access to RJ-6100 printer settings to carry out an installation. Before starting the installation of drivers, log in as a member of the Administrators group. • If you have an earlier version of the Mutoh printer driver installed on your computer, you must remove it with the uninstaller before installing the new driver for Mutoh RJ-6100. • Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.