Download the latest drivers for your AT91 USB to Serial Converter (COM23) to keep your Computer up-to-date. Download the latest drivers for your AT91 USB to Serial Converter (COM3) to keep your Computer up-to-date.

You don't need to modify the kernel to just it just once; you can override it. • Unplug the device • modprobe ftdi_sio • echo 0403 6001 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id • Plug in the device And your device should work. Your other alternative is to use the bind sysfs interface; I suggest using lsusb -t to figure out the correct path+interface in that case. Electromagnetic Simulation Software. Using a partial example from my system, of a usb-storage device (it would be very similar for usb-serial). /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M __ Port 1: Dev 5, If 0, Class=Hub, Driver=hub/3p, 5000M __ Port 3: Dev 6, If 0, Class=Hub, Driver=hub/3p, 5000M __ Port 3: Dev 7, If 0, Class=Mass Storage, Driver=usb-storage, 5000M. $ echo '4-1.3.3:1.0' >/sys/bus/usb/drivers/usb-storage/bind The format of the number is: BUS-PORT(.PORT)+:1.INTERFACE.

Game Pc Snipe. The only number that's not visible in the lsusb output is the first digit after the colon; and it's always been a 1 in my experience. Somebody with deeper kernel knowledge can probably tell me what it is and provide a counter-example.